IP67 waterproof fuse box cable assembly

Product Description

This custom automotive wire assemblies processed with special copper ultrasonic welding for wire joint connection, which replaced common splice PNT terminal.

We have developed a tradition of high-tech engineering, prototyping, and quality custom cable manufacturing at very competitive pricing for wire assembling. Also with professional flow chart (wire cutting-stripping-copper twisting-crimping-crimping 100% inspection-soldering-molding-asssembling-braiding-testing-FQC100% -OQC) , which can help us support customers with stable quality.

Product Specifications

Product Details

01 This custom wire assemblies processed with special copper ultrasonic welding for wire joint connection, which replaced common splice PNT terminal. Ultrasonic welding does not require flammable fuels and open flames, so compared to other welding methods, it's a safer process. Workers are not exposed to flammable gases or noxious solvents. In electronics, copper wires are usually bonded to electrical contacts on circuit boards with solder. The same task can be done using ultrasonic welding in a fraction of the time and without exposing workers to fumes from smoldering lead solder.

Advantages of Ultrasonic Welding :
1. The process is excellent for joining thin sheets to thick sheets.
2. Local plastic deformation and mechanical mixing result into sound welds.
3. Dissimilar metals may be joined.
4. High quality weld is obtained.
5. The process can be integrated into automated production lines.
6. Moderate operator skill level is enough.
7. The process is fast, economical and automated.
8. It is used in mass production up to 60 parts per minute.
9. It ensures increased flexibility and versatility.
10. It produces high strength joints.
11. Very thin materials can be welded.

02 The IP67 waterproofing fuse box with local equivalent one, and the end butt terminal also crimped following IPC620 standard. And the joint connected terminal all crimped following IPC620-C standard, to use ultrasonic welding method to repalce common splice terminal. The welded appearance as below, together with the required welding spec and Ultrasonic quality controlling:

Poor quality:
a)Insulation is embedded in weld nugget
b)End of insulation is lesss than 1 wire diameter or more than 2 wire diameters from weld nugget.
c)Insulation gap is so large that it causes the conductor toviolate minimum electrical spacing.
d)Any loose wire strands, any discoloration of the conductors;
e)Nugget width to height ratio is less than 1 to 1 or exceeds 2 to 1.

ETOP controlled quality:
a) End of insulation is between 1 and 2 wire diameters from weld bugget;
b) Nugget width to heigt ratio is 1.5 to 1; or at least 1 to 1 but does not exceed 2 to 1;
c) Individual wire strands are distinguishable on compression surfaces（top & bottom) of nugget. And there are no loose strands.

03 The IP67 waterproofing fuse box with local equivalent one, which can be customized to be original AVL one. Fuse is 5A, also the connector designed with waterproofing silicone seal and cap.

04 The 5pin automitve relay connector with locking hook to fix during assembling. The Automotive relays are for use in 12 volt electrical systems.Relays are used when you need to switch higher currents than a switch can handle, or when you want to isolate an electrical circuit.

Product Video

Here is the vedio for ultrasonic welding fixture testing and process.

Product Applications

The pressure switch is an important component on many of our electric models. This customized auto wire assembly are applied for automotive air conditioner's pressure switch system, which cycles the vehicle's compressor on and off when the refrigerant pressure falls below an acceptable level. This protects the compressor from damage.

The ETOP custom automobile wiring harnesses are also used for audio, ECU, Hybird battery, engine, GPS, mirror, rear-view, ADAS, auto seat, Buzz and sensor, Lamp, dieseal valve cover gasket fit, fuel pump, diagnostic OBD system., etc.